 |
|
|
|
Click on an area of the body to find out the type of personal
protection equipment you need to wear when carrying out
tasks. |
Long trousers
Wear long trousers whenever you are working outdoors.
They are worn to protect the body from damage (for example,
scratches) and from the sun's harmful ultraviolet (UV)
rays. They are best made from tightly-woven natural fibres.
 |
Inspect clothing
on a regular basis (daily if using every day).
Look for any tears or holes and general wear
and tear. |
|
 |
- Loose clothing near moving machinery parts
can become caught and cause serious injury.
Wear snug fitting trousers to avoid becoming
caught.
- Wash work clothes separately when they
are contaminated, for example, when you've
been handling chemicals.
|
|
|
Long-sleeved shirt
Wear a long-sleeved shirt whenever you are working outdoors.
It is worn to protect the body from damage (for example,
scratches) and from the sun's harmful ultraviolet (UV)
rays. It is best made from tightly-woven natural fibres.
 |
Inspect clothing
on a regular basis (daily if using every day).
Look for any tears or holes and general wear
and tear. |
|
 |
- Loose clothing near moving machinery parts
can become caught and cause serious injury.
- Wash work clothes separately when they
are contaminated, for example, when you've
been handling chemicals.
|
|
|
Chemical spray suit
Chemical spray suits should be worn to protect the head, arms,
upper body and legs from injury, especially when using any chemicals.
There are different spray suits for different purposes. When
you are working with chemicals, always check the Material Safety
Data Sheet (MSDS) for information on the correct precautions
to use.
Ear muffs
Ear muffs protect your hearing from damage from loud
noises above 85 decibels, such as those generated by equipment
and machinery. Continuous exposure to loud noise can lead
to deafness.
When wearing ear muffs, make sure that they fully cup
over your ears. Otherwise, their effectiveness could be
reduced.
 |
When not in
use, store ear muffs in a clean, dry place.
Inspect ear muffs regularly for any signs
of damage caused by general wear and tear.
Damaged ear muffs should be repaired immediately
or, if the damage is too extensive, they should
be replaced.
Well-used ear muffs can get quite soiled
- you might want to get your own personal
set. |
|
 |
Make sure your
ear muffs are of an equivalent (or higher)
decibel rating to the machinery being used. |
|
|
Safety glasses
Safety glasses protect the eyes from the sun's harmful
ultraviolet (UV) rays, flying particles or fragments and
chemical splashes.
Most people are aware of the problems the sun can cause
with the skin, but it is not as well known that the sun
can also damage the structures in and around the eye.
You should always wear protective sunglasses to protect
your eyes from the sun. Make sure your protective glasses
comply with the standard AS/NZS 1336:1997.
 |
It is a good
idea to store your glasses in a proper case
or cover, when you're not wearing them. This
will keep them in one piece and prevent unnecessary
scratches. |
|
|
Safety goggles
Safety goggles should be worn to protect the eyes from
flying objects, and splashes, fumes, gasses, vapours and
dusts from horticultural pesticides. It is important that
they are tight-fitting and make a good seal around the
eyes. |
Work boots (steel-capped)
Steel-capped boots protect the feet from crushing and
impact injuries and puncture wounds.
Wear steel-capped boots whenever there is a potential
risk of injury to the feet, for example during any construction
or other heavy work, or whenever you're working with tools.
For field activities that do not involve any heavy work
(eg collecting plant specimens or observing animals),
you can wear normal leather boots without steel caps.
Make sure that the boots are the correct size and fit
comfortably.
 |
Keep boots in
good condition. Inspect regularly for holes
and damage caused by general wear and tear. |
|
|
Work socks
It's a good idea to wear quality wool or cotton socks
to absorb sweat and help avoid blisters. |
Gumboots
Gumboots protect the feet from chemical burns and poisoning.
They are made of rubber or, preferably, PVC. Gumboots
are also known as Wellingtons, water boots and rubber
boots.
Wear gumboots whenever there is a risk of contamination
to the feet. Make sure that they are the correct size
and fit comfortably.
When working with hazardous substances it is important
that boots are unlined. Avoid lining materials such as
leather, canvas or cloth because of their absorbency.
 |
Keep gumboots
in good condition. Inspect regularly for holes
and damage caused by general wear and tear.
Wash your gumboots immediately after use and
as needed, using soap and water. Hang them
upside down when not in use. |
|
 |
Wear your trouser
or overall bottoms outside of the boots to
prevent any chemical from running into the
boot. |
|
|
Leather work gloves
Leather gloves protect the hands from abrasions/cuts,
burns, infection, dermatitis and injuries associated with
extreme temperatures. They are very useful for general
duties and should always be worn if your hands are likely
to be hurt.
Gloves are particularly useful when handling animals
- they can save your hands from a bite if an animal is
agitated! Make sure that they're fitted enough to allow
you to do some finer hand movements, such as measuring
an animal or tying it into a cloth bag.
Leather gloves are essential when cutting fencing wire
- the wire has sharp ends and the galvanised coating is
rough on the hands.
 |
Keep work-gloves
in good condition. Inspect regularly for holes
and damage caused by general wear and tear.
Replace as necessary. |
|
 |
Work-gloves
should not be used when handling hazardous
substances as leather is very absorbent. |
|
Extra-value tip:
Use an antiseptic soap to wash your hands before eating! |
Sunblock
Sunblock or sunscreen protects the skin by blocking out
the sun's UV (ultraviolet) rays. These would otherwise
burn and damage the skin. Always use 30+ sunblock as this
is the best available.
Apply liberally to exposed skin before heading outdoors.
Re-apply at least every four hours. Re-apply more regularly
when working around water or perspiring heavily.
Sunblock should not be your only protection against the
sun. A wide-brimmed hat, sunglasses, long-sleeved shirt
and long pants should also be worn. Exposure to the sun
can cause skin cancer.
 |
Store sunblock
below 30°C |
|
 |
Avoid contact
with eyes and mouth. Discontinue use if irritation
occurs or a rash appears. |
|
|
Latex gloves
Wear latex gloves when handling low-toxicity chemicals
and whenever there is a risk of contamination to hands.
Latex gloves will protect hands from infection, and are
very hygienic.
Put gloves on carefully to avoid damaging them. Make
sure they fully cover the hands. Latex gloves are generally
disposable and come in a variety of strengths.
 |
Do not re-use.
Disposable latex gloves have a very short
life. Discard immediately if gloves develop
a tear or a hole. |
|
|
Wide-brimmed hat
A wide-brimmed hat protects the head, face and neck from
the sun's harmful UV (ultraviolet) rays.
Wear a wide-brimmed hat on your head whenever you are
outdoors.
A hat should not be your only protection. Safety glasses,
a long-sleeved shirt, long pants and sunscreen should
also be worn.
Exposure to the sun can cause skin cancer.
 |
It is best to
hang your hat up somewhere so that it can
be easily found when you're ready to go outside.
Depending on the type of material your hat
is made from, you may be able to wash it. |
|
|
Fly net
A fly net fits over your hat and keeps flies and other
insects away from your face. |
Safety helmet
A safety helmet protects the head from falling or flying
objects and should be worn when carrying out tasks like
overhead pruning. |
Face shield
Face shields protect the whole face from flying fragments
and splashes. They can be used as a substitute for safety
glasses. Wear a face shield when using a brushcutter or
chainsaw, when you are working in prickly bushes at face
height or wherever flying particles or splashing from
chemicals may occur. It will help prevent injuries such
as embedded objects, cuts and scratches, and burns or
irritation from chemicals, light, steam, dust, mist or
vapours.
 |
Store your face
shield where it won't get damaged or scratched.
Keep the shield clean and free of any grime.
You should wash your face shield with soap
and water immediately after use and as needed.
It can also be cleaned by soaking for two
minutes in a mixture of 30 ml chlorine bleach
in 4 L of water. |
|
|
Apron
An apron should be worn to protect the body and clothing from
splashes and spills, for example, when mixing horticulture pesticides
that are corrosive or cause burns. This means they must be long
enough to cover the body from the shoulder to mid-calf and made
from chemical-resistant material, for example, PVC.
Always wash down your apron after use and hang it up when not
in use.
Gaiters
Gaiters are worn as extra protection for your lower legs
(from knees to ankles). They are usually made from heavy
cloth or leather. |
Waders
Waders help keep you dry and warm if you are working in a watery
environment. They come in a variety of shapes and sizes, but
usually have built-in feet and come up to chest height.
Overalls
Overalls should be worn to protect the arms, upper body and
legs from abrasions/cuts, allergic reactions and injuries, for
example, when working with horticultural pesticides.
Harness
A harness should be worn to protect the back, neck, shoulders
and upper body from strain and stress injuries, for example,
when operating equipment such as line trimmers and brushcutters.
Wetsuit
A well-fitting wetsuit protects your body against heat loss
when you are working in water. They come in a variety of shapes
and sizes.
Ear plugs
Small plugs that fit inside your ear canal. They protect
your hearing by blocking out noise from, for example,
noisy machinery. |
Chemical gloves
Chemical gloves should be worn to protect the hands from
abrasions/cuts, burns, infection, dermatitis and injuries
associated with extreme temperatures, for example, when
handling horticultural pesticides that are corrosive or
cause burns. Chemical gloves should be made from chemical-resistant
material, for example, PVC, be unlined, waterproof, elbow
length for maximum protection and worn on the outside
of clothing. Never wear rubber products when handling
horticultural pesticide because they can react with some
substances and dissolve.
Check that the gloves haven't perished or developed holes. |
Insect repellent
A cream or spray that you apply to your skin to stop
insects biting you. |
Dust mask
A dust mask should fit comfortably over your nose and mouth.
It can be used to lessen the amount of dust and non-toxic air
contamination you breathe in.
Dirty or contaminated masks should never be re-used. This mask
should not be worn when dealing with toxic gases; a respirator
should be used instead.
Face mask
A face mask should be adjusted to fit comfortably over your
nose and mouth. It can be used to prevent you breathing in dust,
fumes, micro-organisms and toxic air contamination.
It is important to use the right type of filter, for example,
activated charcoal filters remove dangerous chemical vapours
while particle filters are used for chemical dust.
|
|